1.25Gbps 850nm GBIC Optical Transceiver, 550m Reach
ING-SX series GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 550m transmission on 50/125 μm MMF.
The transceiver consists of two sections: The transmitter section incorporates a VSCEL laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All modules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information Compatible with GBIC MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053.
Features
Dual data-rate of 1.25Gbps/1.0625Gbps operation
850nm VCSEL laser and PIN photo detector
Duplex SC optical interface
Standard serial ID information compatible with SFF-8053
550m transmission with 50/125 μm MMF
275m transmission with 62.5/125 μm MMF
+3.3V/5V single power supply
RoHS Compliant
Operating case temperature: 0 to +70℃
Applications
Switch to Switch interface
Switched backplane applications
Router/Server interface
Other optical transmission systems
Specifications
Form Factor GBIC
Distance 550m
Data Rate 1.25G
Low End Case Temperature (°C) 0°C
High End Case Temperature (°C) 70°C
Diagnostics Digital
Transmitter VCSEL
Receiver PIN
Wavelength (nm) 850
Connector SC
